Description

The CAMPKO gas cylinder holder distributed by bouteillegpl.fr by AIRGPL is suitable for the attachment of traditional exchangeable gas cylinders, aluminium gas cylinders and CAMPKO gas cylinders.
The gas cylinder holder is predestined for the fixed installation of gas cylinders in motorhomes, motorhome vans or caravans, but it can also be used for industrial purposes or for attaching gas cylinders in the leisure sector.

The fixing plate and tightening straps are made of high-quality stainless steel. The tightening straps are additionally rubberized.

The straps are opened and closed using two hexagon socket screws, so that the gas cylinder can be removed quickly at any time.

If fixed in the motorhome, the gas bottle holder is securely screwed to the rear or side wall of the gas box. For greater stability, it is recommended to attach it to the vehicle body or to use a backplate (112652) on the rear wall of the gas box.

Product Description: The CAMPKO Gas Cylinder Holder has been specially designed to securely attach refillable gas cylinders in vehicles or stationary gas storage spaces. The product is compatible with UN 67R01 and guarantees safe use when properly installed.

Application: The gas cylinder holder is designed for use in vehicles or fixed areas to secure gas cylinders and facilitate transport.

WARNING: Failure to follow safety instructions may result in serious injury or property damage.

Installation should only be carried out by trained personnel. You will find a list of installers by consulting the menu of the site.

Use only the fasteners supplied with the product.
Make sure the bracket is securely attached to the vehicle’s chassis or to a suitable surface.
Before each use, check the gaskets and the correct attachment of the gas cylinder. Always store gas cylinders in well-ventilated areas.
Protect the holder and gas cylinder from extreme temperatures and direct sunlight.
Do not use the gas cylinder holder for damage or unauthorized gas cylinders.

Tools needed:

13mm socket wrench Alan 6mm wrench Drill with 10mm drill bit

Installation steps:

Determine the position of the gas cylinder in the gas storage room or vehicle. Mark the 4 attachment points with the support. Drill the dots mark with a 10 mm drill. Attach the front side of the stand using the screws and nuts provided. Pass the blood through the openings provided in the support and fix them firmly. Place the gas bottle in the support and secure it with the straps.

Maintenance and Inspection:

Regularly check that the fasteners and straps are secure and not worn.
Make sure that there is no corrosion on the metal parts. Clean the support regularly to remove dirt or debris.
This material is distributed by AIRGPL.